Raw material for AAC production are usually sand or fly ash, lime, cement, gypsum, and aluminium paste or powder.

Processing and storage of raw materials.

Main equipment in this section are ball mill, powder silos, slurry tanks, slurry agitators, etc.

It is a key section for AAC panel production. 

The production of steel mesh (mesh cage) for autoclaved aerated concrete panel, manual (automatic) hanging of mesh and automatic circulation of assembly frame.

Main equipment in this section are mesh welding machine, assembly frame automatic circulating system, anticorrosive liquid dipping tank, drying system, wax-dipping lifting device, manual (automatic) mesh asemble system, etc.

The raw materials are added to the pouring mixer after accurate measurement according to the set recipe, and the mixed materials are evenly stirred in the pouring mixer, and the stirred slurry is poured into the mould.

In the production of plates, the pin-inserting hoister inserts the assembled steel mesh cage into the slurry.

The mould bearing the slurry is transported by the ferry cart to the pre-curing room for static maintenance, and the slurry in the mould completes the gas hardening in the pre-curing room to form a blank cake.

The mould is transported to the cutting area by the pre-curing ferry cart. During production, the pin-drawing  is completed in this process.

Main equipment in this section are slurry and powder batching system, aluminum powder automatic measuring and mixing system, pouring mixer, pin-inserting and pin-drawing out hoister, pouring ferry cart, pre-curing ferry cart, friction wheel, etc.

It is the core section in the production process of AAC products

The mould loaded with the cake is demoulded by the tiliting hoister

The cake with the side plate is placed on the cutting cart, and the product is completed by side, horizontal and vertical cutting.

The cut cake is completed by the tilting table to remove and recycle the corner waste.

After the waste is removed, the cake is completed by the loading hoister and the ferry cart.

Main equipment in this section are tilting hoister, cutting machine, tilting table, loading hoister, etc.

The grouped cakes are sent into the autoclave for constant pressure maintenance by the traction machine and the ferry carts before the autoclave.

The autoclaved products are pulled out of the autoclave by the ferry cart and transported to the finished product packaging section

Main equipment in this section are traction machine, autoclave, ferry cart, and Bridge before and after autoclave, etc.

The cakes that have been autoclaved are first separated and then sorted, palletized, packed and transported to the storage yard by the packaging and conveying equipment.

Main equipment in this section are separator, clamping hoister, block/panel conveyor line and rotating hoister，etc.

Teeyer intelligent products are equipped with automatic control system, adopted SIEMENS controller, Schneider electric components, to realize one button start/stop, online linkage control, security interlock functions. 

Multi-control mode can be selected, like semi-automatic, full-automatic, which can meet different requirements to different plants, etc.