Storage tanks are containers that hold slurry in the raw material preparation section. 

Slurry storage tank is an important part of autoclaved aerated concrete equipment of our company, which is composed of silo, gear reducer, mixing shaft, movable frame, center fulcrum and so on. It is mainly used to store the prepared fly ash slurry or mortar, and is equipped with a stirring device to avoid slurry precipitation.

Pin-inserting/drawing out hoister is used for transporting the frame with steel mesh.

The assembled steel frame or steel cage is inserted into the mold and then pulled out of the mold by the hoister. The accuracy of the hoister will affect the cage or mesh position in the mould, it can realize the rapid rotation and accurate positioning of the steel mesh assembled in the production process of aerated concrete. It is an important equipment in the AAC panel production ...

The assembled steel mesh, along with steel pin, is lifted and immersed in a wax dipping pool. This process effectively prevents the slurry from adhering to the steel pin after demolding.

The anti-corrosion ferry cart suspends batches of assembled steel mesh sheets (or cages) and immerses them in a corrosion-resistant solution within a dipping tank, ensuring comprehensive saturation of the steel mesh sheets (or cages) with the solution. Once the immersion is complete,...

The ferry cart is suitable for the conversion of steel bar between different frames in aerated concrete panel workshop. The frame to be transferred is carried out from the fixed frame to the ferry cart, and the ferry cart leaves the waiting stop frame. After the ferry cart is aligned with the receiving frame, the assembly frame is manually pushed to the receiving frame.

The assembled frame ferry cart is composed of the ferry track, the ferry walking system, the parki...

The weighted fresh slurry, waste slurry, water, cement, lime，gypsum, and aluminum paste will be added into mixer in sequence. The high speed mixing will make the slurry into a uniform mixture with certain density, during this processing a heating device may be required.

The raw materials are thoroughly mixed to form a slurry, which is poured into the mold. The pouring process is controlled by a pneumatic butterfly valve. Before pouring, the stirring device will full...

The pre-curing cart is used convey the mould after pouring to the the pre-curing room, and then convey the pre-curing mould to be cut. The mould cart to be transferred is sent from the ground track to the ferry cart through the friction wheel on the ground and the friction wheel on the ferry cart. The pre-curing ferry cart drives off the track to be transferred. After the ferry cart is aligned with the receiving track, the friction wheel on the ferry cart will push the mou...

The mould is a recyclable part for AAC production line. Together with side plate, the AAC block mould or AAC panel mould is used for holding the slurry material from the pre-curing section to the cutting section.

The suitable type and quantity will depend on the target AAC annual production capacity. Our mould consists of steel channel and steel plate, so it is stable and durable. Forging wheels are available at the bottom. Sealing strips are also fixed to avoid the ...