After pre-curing, the mould will be transferred to tiling area. The hoister should grasp mould to rotate it with 90 degrees, then the clamping arm controlled by hydraulic motor will loosen to put side plate and cake together on the cutting cart. Then the empty mould base will be sent back to the side plate conveyor line, which is assembled with a free side plate to become a complete mould and ready for the next pouring processing.

The tilting table is installed at th...

The step cutting machine set is suitable for six-sided cutting of green cake in aerated autoclaved concrete (AAC) workshops, and the cut green cake form semi-finished products in panel or brick shape that meet national standards.

Our cutting machine set consists of horizontal cutting, vertical cutting, cutting carts, tongue-groove making machine, vacuum hood and etc.

The step cutting machine set is the core special equipment for aerated concrete production, whi...

The tilting table is suitable for turning over the cake to remove the bottom(top) waste after cutting, so that the waste material generated by the cutting machine is removed and dropped into waste pit, then recycling in the following production process. 

The tilting table can realize the recycling of the waste generated in the production process of aerated concrete, reduce steam consumption and solid waste material, reduce the labor intensity of employees in cle...

The cleaning machine is suitable for the automatic bottom (top) peeling of the green body after cutting section. This equipment must be used in conjunction with the tilting table, which can separate the waste from the cake which is generated during cutting process and recycle it into waste slurry.

It is an important equipment in AAC production plant, and it’s performance will directly affect the production efficiency and the products qualification rate.

The ferry cart before autoclave is suitable for transfering the autoclave cart in aerated concrete workshop and the green body carried by it from the empty cart track to the grouping track. The autoclave cart to be transferred is sent from the empty cart track to the ferry cart through the ground transportation equipment, and the ferry cart drives away from the empty cart track. After the ferry cart is aligned with the receiving track, the ground conveying device pulls the...

The bridge cart before (after) autoclave is suitable for connecting the grouping track before the autoclave and the autoclave cart track in the autoclave during the AAC production, so that the autoclave cart and the semi-finished cake carried by it can be autoclaved in the autoclave or the finished product can be discharged from the autoclave. The bridge is controlled by electric and hydraulic system to realize automatic operation.

It is a docking device between the ...

The driving part of ferry cart carries the autoclaved cake, to connect the autoclaving cart automatically, then pulling the cake out of autoclave. The first autoclaving cart will unhook connection with driving part, then transferred by ferry cart to return rail, the unloading area.

The ferry cart can stop, position, and get aligned to the rails accurately after rapid transverse movement. When being loaded, the cart can convert the frequency and run slowly. However, t...